Best Jigsaw Blades: Top Picks and What to Look for…

Everyone who has ever done or going to do a DIY project certainly knows that at some point in time, a jigsaw is needed. This is the case because the best jigsaw blades can practically do anything. Not only that, it is straightforward to operate that even beginners can easily master them, but again, even beginners should know the right blade to pick before attempting to mount the blade on a saw.

That is why we are going to take a look at some of the best blades for your jigsaw. At the same time, we will discuss some important points to remember before you go ahead and buy one. You might be surprised that it is not only about blade strength and sharpness; in fact, it is a combination of a lot of things from the material that you are using to the blade design.

Are you looking for a jigsaw blade? Then keep on reading to find the right one for you!

Introduction to Jigsaw Blades

Just like what we mentioned, operating a jigsaw is very easy. However, one should know that in order to get the right cut, you should use the right blade. And no, it is not as simple as using a thinner blade to have a thinner cut.

With that said, you should also know something about the design of the blade and not just about how sharp it cuts. More than that, you have to understand the differences in jigsaw blade teeth, widths, lengths, and more so that you have an idea on how well it cuts. Needless to say, if you do not know the basics, you might end up with splintered and ugly cuts.

Just think of it this way, even though a jigsaw is such a useful and versatile tool to have, it will be useless if you get the wrong blade. Therefore, just let us assist you and give you our recommendations for the best jigsaw blade models. We will talk about the features of each blade and tell you the pros and cons of using them.

Best Jigsaw Blades: Top Three Choices

1. DEWALT DW3742C 14-Piece T-Shank Jig Saw Blade Set

Coming in as a set with a case and five blades for wood and metal, this is the best of the best because of the variety it offers. Not only that, but its performance is superb too. In terms of the blades that you are going to get, you have a lot to choose from blade fabrication to TPI. There are 32, 18, 12, 10, and 6 TPI.

Most of the blades are made of HCS, while others are from bi-metal construction. Thus, you know that what you are getting is so durable. Also, they come in a lot of lengths which are compatible with Bosch and DeWalt jigsaws.

2. Bosch T5002 Assorted T-Shank Jig Saw Blade Set

This comes in second just because it is not as versatile as that of the one from DeWalt, but when it comes to performance, they are pretty close. This one has 10 blades that can be used for Bosch jigsaws as well as for other models of the machine.

The blades are divided into sets, wherein one can be used for woods while the other for metal objects. The blades for wood materials are further divided into two pieces each for speed, fine and straight cuts, and curvy cuts.

You can also expect that each blade is made of HCS, making them sharp and flexible. With an affordable price tag, the blades are durable and easy to use, as well as functional.

3. Hitachi 725397 Three-Pack Jig Saw Blades

This product is special because it comes as a set of three carbide-tipped blades with ultra-low TPI, specifically six. Honestly, that does not usually come in a set. In general, if you purchase a set, they only come with blades that differ in thickness, but with this one, even the design differs!

This type of blades will work great in slicing through materials that are abrasive. Some examples of which are cement bonded particle board, FRP, hardboard, and other similar materials. Additionally, this is great because it has a warranty for five years, which is longer than other jigsaw blades.

Who Should Buy Jigsaws?

Before buying a jigsaw, you should first know if this type of machine will suit your preferences and needs. So in general, buying a jigsaw is definitely for you if you are someone who shapes woods constantly. We are not only talking about direct cuts, but also curves, piping, and the likes.

Of course, that does not necessarily mean that it is the only purpose of a jigsaw. In fact, it is also great for crosscutting and shape cutting. For those who like to work with fiberboard, aluminum, plastic, and metal, the jigsaw can also be used for those.

The truth of the matter is, with the strength of the jigsaw and the right blade, it can almost cut through anything. The emphasis, though, is put on using the right blade design.

With that in mind, no matter how strong the jigsaw is, if you use the wrong blade on a specific material, the result will be so jagged or much worse, the blade might break. In addition, you should also know the proper technique to use it. You really should not be a professional to do it correctly, but at the very least, you should know when to do it firmly or gently so that you can maximize the use of the tool.

Jigsaw Blade Buyer's Guide

We are now going to talk about the essential factors to know before buying a blade. Just like what we mentioned, there will be a specific blade for a particular project that you are working on at the moment or each time.

If you choose the right blade, then you will find that you are not exerting that much effort and your work will be finished faster and more efficiently. Let us now take a look at these points to consider.

1. The Material to Cut

A lot of materials can be cut by a jigsaw. Some of which are plexiglass, fiberglass, glass, ceramic, leather, cardboard, marble, plaster, and metals. As such, what you should do is to check if your blade can cut that specific material.

One way to do so is to check the hardness of the material and cross-reference that to the pressure that can be taken by your blade. The easy route, though, is just to check the label of the blade itself.

Manufacturers have made it easier because they usually indicate the list of materials that can be cut by that blade. They can either list them explicitly, while others do color coding.

2. Type of the Shank

First off, let us talk about what a shank is. It is simply the part of the blade that attaches to the saw. Usually, it can be found at the end of the blade. One thing to note about the shank is that not all of them are compatible with the saw.

Nonetheless, there are already releases that have a universal fit, but these are not readily available. Majority of the blades still have different shank types. Some of the most common shanks are the U shanks that have a "u" at the end of the blade.

Another type is T shank which has a rounded end. This type of shank is the one that is used for saws that have a quick blade-change feature. This simply means that the blade can be attached to the saw without using other tools.

More than that, T shank is most commonly used because it is compatible with saws that have a U shank. Speaking of U-shanks, these need tools to attach to the saw. Meaning you have to manually attach it with the use of an Allen key, locking screw, or other tools.

3. Size of the Blade

The rule of thumb is that the blade should be an inch longer, at the very least, compared to the thickness of the material. With that said, the size of your blade should always match your cutting style and the material that you are cutting. Moreover, the style of your cutting can be determined by the thickness and the width of your blade.

If you have a longer blade that is a bit thicker, these were made to tackle thicker materials because it will prevent it from bending. On the other hand, if you have a blade that is thinner, this can be used to make sharp and cleaner curves.

Unfortunately, they are weaker than the longer and thicker blades. This weak aspect of it makes it best to cut delicate patterns on certain materials.

4. The Material of the Blade

You might find yourself drowning with the blade material if you do not know what you are looking for because there are a lot of types. The rule of thumb for this one is the denser the blade is, the thicker the material that you can cut it with. Accordingly, the most common materials of the blade are HSS which stands for high-speed steel, HCS or high carbon steel, bi-metals, and tungsten carbide.

Tungsten carbide blades can be costly because they cut smoothly through the hardest of materials. This is why they are used for specialty cutting and masonry. On the other hand, HSS is great for cutting hard materials in a somehow moderate way, but it is prone to overheating.

HCS blades are gentle and flexible enough to cut materials that are softer; hence, they are cheaper. As for bi-metal blades they contain HSS and HCS, so they are very flexible, but they can also handle cuts that are heavy duty. At the same time, they are more durable than pure HSS and HCS blades.

5. The Teeth Per Square Inch or TPI

The higher the TPI, the better it is to cut hard materials while the lower the TPI, the better it is to use on softer materials. Also, if the TPI is high, then you will get smoother cuts. As for low TPIs, the cut is more of just a straight cut.

6. Tooth Layout and Type

In general, you can choose from two types, and these are ground or milled teeth. Ground teeth are sharp, but they cut slowly, which makes them great to be used on cutting edges that are fine.

On the other hand, milled teeth tend to be blunt so they cut rougher and faster. That means, they tend to last longer than that of ground teeth.

Moving on, there are four tooth layouts in general. These are tapered, wavy, reverse, and side. A tapered set of teeth is good to be used when you need to cut slowly and if you need to cut edges that are fine.

Wavy teeth were designed to look like waves so that they can make finer and straighter cuts, while reverse layout teeth are great to be used on materials that tend to splinter easily when cut. As for side set of teeth, it is used for rough and fast cuts.

Comparison Chart

BLACK+DECKER 75-626 Assorted Jigsaw Blades Set

Bosch 10-Piece Assorted T-Shank Jig Saw Blade Set T5002

DEWALT DW3742C 14-Piece T-Shank Jig Saw Blade Set with Case

Hitachi 725397 4-Inch 6 TPI Jig Saw Blades For Fiber Cement Siding – 3 Pack

Bosch T101AO3 3-Piece 3-1/4 In. 20 TPI Clean for Wood T-Shank Jig Saw Blades

Product Reviews

Let us now go over our top five choices for jigsaw blades. You will get to know their features and the pros and cons of using them. So, keep on reading to find the jigsaw blade for you.

1. Black & Decker 75-626 Assorted Jigsaw Blades Set

This one has a total of 24 jigsaw blades that are a combination of metal and wood compatibilities. The metal cutting blades can cut through non-ferrous metals and aluminum. As for the wood cutting blades, they do well on general cutting work, but they can also be used in cutting delicate patterns.

All of which have a U-shank and can be fitted in jigsaw shanks that have a universal fit. They also have a scrolling blade design which is ideal for scroll cutting in even the tightest of spaces.

At the same time, they can cut smoothly that you might opt out of sanding the wood beforehand. You are assured that the tip will not get chipped even if you are working with the most delicate of materials.

More than that, this set also has blades that can make both smooth and rough cuts. Some of the pieces can be used on thin materials, while the others are strong enough to cut through materials that are harder and thicker. Surely, you will find the blade that you need in this set.


  • Shank Type: U-shank
  • Color: Silver
  • Number of Blades: 24
  • Dimensions: 5.2 x 0.6 x 2.9 inches
  • Weight: 1.6 ounces


  • Versatile
  • Compatible with a lot of saws
  • Great for general cutting
  • Great for specialized cutting
  • Scroll cut is high quality


  • Hard to attach to the saw
  • Not easy to master
  • Can bend easily
  • Not the standard size
  • Might be too thin for some


This set of 24 U-shank blades are designed to make smooth and rough cuts on metals and woods. The manufacturer also made sure that there are blades that can be used for thin materials, as well as for thick ones. Although this is hard to attach to the saw, it is compatible with a lot of jigsaw models.

2. Bosch T5002 10-Piece Assorted T-Shank Jig Saw Blade Set

This product has four metal cutting blades and six wood cutting blades. Both of which are compatible to be used on jigsaws that are professional grade and consumer grade. They are also compatible with saws from major manufacturers like Makita, DeWalt, Porter Cable, Hitachi, Craftsman, Metabo, and Milwaukee.

The make of the T shank blade is high carbon steel which is flexible that is best for simple cutting work. What makes it very easy to determine the blade that you are going to use is the fact that all of them are color coded and labeled depending on the material that they are supposed to cut. Therefore, these can be good for beginners who are not that familiar with what blade to use on a specific material.

On the other hand, as it is a more flexible blade, you should not use it on thick materials. Likewise, the T shank design makes it easy for you to attach it to your saw without the use of other tools. At the same time, you do not have to mount it with screws as it does not have holes.


  • Blade material: HCS
  • Color: Silver
  • Shank type: T-shank
  • Dimensions: 5 x 4.9 x 0.8 inches
  • Weight: Four ounces
  • Number of blades: 10


  • Easy to use and mount
  • Less risk of breaking
  • Versatile
  • Great for cutting thin materials


  • Gets dull easily
  • Cannot cut harder materials
  • Might be too flexible
  • Not much variety
  • Packaging is not good


This pack is a good choice if you are going to do general cutting work. These will not be great for heavy-duty cutting, but that does not mean they are weak. In general, it can also do scroll work, but only with thin to moderately thick materials.

3. DEWALT DW3742C 14-Piece T-Shank Jig Saw Blade Set

This one has a total of 14 T shank blades that have five types which are classified by TPI including 32, 18, 12, 10, and 6. All of which come in different lengths that can be used to cut both metal and wood. The six and 10 TPI blades are four inches long, while the 12 is 3.5 inches and the 32 is three inches.

All of the blades are made of HCS material except for the blades that measure three inches. For those, they are made of a bi-metal material. Also, since they have a T shank design, they are compatible with saws from Bosch and DeWalt.

Such a design also makes switching in between blades easier and faster. This also minimizes the risk of damaging the blades as there is no need for screws. If you are someone who hates fumbling with your saw so much, then this might be for you.

More than that, in terms of blade design, they are so flexible so you can make cuts that are smoother which are great for soft materials. But they can also be used on heavy-duty cuts as the blades do not dull easily; thus, prolonging their lifespan. As for their different lengths, these are great for cutting materials that have different thicknesses.


  • Blade material: HCS and bi-metal
  • Shank type: T-shank
  • Dimensions: 6.8 x 6.1 x 1.3 inches
  • Weight: 8.5 ounces
  • Number of Blades: 14


  • Versatile
  • Easy to use and attach
  • Comes with a usable case
  • Compatible with a lot of saws


  • Hard to determine the type of the blade
  • Might be too flexible
  • Length does not vary a lot
  • Cuts slowly
  • Not that durable


If you are looking for an affordable set that can do the general cutting, this is the one for you. Keep in mind that it was not made for tough cuts, but each blade can also be used in various ways, making it versatile.

4. Hitachi 725397 Three-Pack Jig Saw Blades

This set contains three blades that have a carbide tip. They are all four inches long and has a TPI of six. This type of TPI is great for fast and coarse cuts on materials that are abrasive, thick, and hard. An example of which are reinforced fiberglass plastic, cement bonded particle board, and hardboard.

Since it is made of a carbide material, the tip of the blades is heavy-duty so that they can cut tougher materials with ease. At the same time, the fact that they have a low TPI, they can easily cut through fiber cement or any other material of the same thickness, hardness, and grade.

More than that, the blades have a T shank which is most likely compatible with a lot of saws. They are also very convenient to attach as you do not need other tools to secure them.


  • Blade material: Carbide-tipped
  • Shank type: T-shank
  • Dimensions: 5.5 x 0.9 x 0.4 inches
  • Weight: 0.8 ounces
  • Number of Blades: Three


  • Easy to mount
  • Convenient to use
  • Material is strong
  • Great for specialized cutting


  • No variety
  • Too weak for strong cuts
  • Might be too short
  • Dulls easily


This set has a little bit of everything. Surely, you will get to do a lot of different cuts with these blades, not just general cutting applications. It is also handy that you have a lot of varying TPIs and blade sizes.

5. Bosch T101AO3 Three-Piece T-Shank Jig Saw Blades

The set comes with five T shank wood cutting blades. What is so unique about these blades is that they were designed for sawing in five points, paving the way for the saw to have a more powerful cut.

Each blade also has what they call a durable precision design which just means that the blade utilizes maximum performance in such a way that it can cut smoothly and cleanly. Also, the blades can cut curved or straight on materials like laminated substrates, laminates, medium density fiberboard, and plywood.

It is also good to note that the blades are compatible with almost 90% of both professional and consumer grade jigsaws. At the same time, they are made of HCS material which can make curved cuts smoothly.

The blades also have pointed teeth paired with a narrow body which is ideal to be used on delicate material without the risk of chipping. Additionally, the T shank design is excellent for quick blade changes that require no tools.


  • Blade material: HCS
  • Shank type: T-shank
  • Dimensions: 5.5 x 1.3 x 0.2 inches
  • Weight: 0.8 ounces
  • Number of blades: 5


  • Has an almost universal fit
  • Has a lot of power
  • Easy to use
  • Convenient to mount
  • Great in preventing splinters
  • Offers a lot of stability


  • Can easily wear out
  • The material is not that durable.
  • Not for beginners
  • Too thin for some
  • Not great for general cutting


Definitely, these blades are not for general cutting applications. Instead, these are for detailing, piping, scroll cutting, and the like. Additionally, they are not made for heavy duty cutting since they might break.

Alternative Choices

There are really a lot of other choices besides the top five that we mentioned above. So, if what you are looking for is not included in the top five, we will discuss some other choices. To cut things short, we just talked about their overall design and the cuts that are produced by the specific blades in the set.

1. Black & Decker 75-530 Jig Saw Blades

This set has five U shank blades and is designed to be used for general cutting of wood that is about two inches thick. The cuts that you get are smooth as they are not that long and this also speaks about the durability of the blade. Also, all of the blades are labeled so that you can see easily which one to use on a specific material.

2. Bosch T101AO3 Three-Piece Jig Saw Blades

The 3.25-inch blades included in this pack have a pointed teeth design which is great in preventing chipping and splintering when working on materials that are delicate. Also, the TPI is 20, so it is great to be used on cutting laminated substrates, double-sided laminates, plywood, fiberboards, and hard and soft woods. When you mount this on a good jigsaw, it can produce curved, scroll, and straight, cuts.

3. Hitachi 725397 Three-Pack Jig Saw Blades

These four-inch blades have extra strength and durability because they are carbon tipped. That means they are great for cutting hard materials. Coming in at a TPI of six, these blades can help you work faster and make rough cuts on materials that are abrasive.

4. Bosch T102BF Three-Piece Jig Saw Blades

These two and 5/8-inch, 13 TPI blades are made of bi-metal material, so they have the combined effects of HSS and HCS. They are very flexible but can also cut through harder materials. They will also be great for straight and clean cuts on acrylic and other similar materials.

5. Bosch T101AO100 T-Shank Jig Saw Blades

This set contains 100 blades that have a size of 3.25 inches and TPI of 20. They are great to be used on plywood, laminated substrates, and laminates. Also, you get a lot of variety because they can be used for curved, straight, and scroll cutting. Lastly, they have a pointed design, which can help prevent splinters while cutting.

6. Bosch T10RC Jig Saw Blade Set

If you are after variety, this is a good pick because it comes with six clean blades for wood, two precision blades for wood, one basic blade for wood, and one extra clean blade for wood. Therefore, you can create clean cuts or cuts that do not have any splinters. What is better is that this set, comes with a plastic case that is heavy duty, which is great for organizing the blades.

7. Kent T244D 5-6 PRO TPI Jig Saw Blades

This set has 10 T shank blades that have a working length of three inches and overall length of four inches. As for the design, they are of the side set and ground styles which makes them perfect for making fine and rough cuts.

The blades are made of HCS material, so they are flexible and can hold against heat. With these blades, you can make surface or curved cuts on OSB, plywood, and wood quickly.

8. Bosch T244D Jig Saw Blades

This is another variation of the jigsaw blade of Bosch, but this time this is meant for cutting soft and hard wood materials. You can also use these four-inch blades on both plywood and OSB that measures about 0.25 to 0.375 inches of thickness. Their very low TPI, specifically six, paired with the HCS material makes them best for fast cutting. It also means that they will be used for a long time.

9. Bosch T101B 4-Inch 10-Tooth Jig Saw Blades

This set contains five blades that measure four inches with a TPI of 10. They can be used for general cutting applications on hard and soft wood, plastic, laminated particle board, plywood, and others.

The cuts that you get are fine, clean, and straight that does not have splinters. Lastly, they can handle wood with an estimated thickness of 1.25 inches.


In order for you to find the best jigsaw blade for your project, you should not only focus on the qualities of the blade. You should take note of a lot of factors like the design, TPI, and the material that you are going to cut. Only then can you determine if what you are getting is going to work perfectly.

At the same time, you should also note what type of shank it has. This has a lot to do with how well or how poorly you can mount the blade to your saw. Likewise, this speaks volumes on how fast you can change in between blades. In addition, knowing the shank type can help you with the tools that you might need in order to attach the blade properly.

On that note, you are now ready to choose your jigsaw blade. We know that it might be intimidating as a lot of them come in sets, but now that you have read our guide, you have an idea on how to use each one.

You also now know which blade will hold against immense pressure as well as the blades that are perfect for gentler material. It will only take a bit more practice so that you can master each of the blades.

Just make sure to exercise caution when mounting the blade even when working with T shanks as they might not be secured properly. Remember, when in doubt on what blade to use based on a specific material, just check the labels since more often than not, they are already indicated there. Good luck on your purchases!

Click Here to Leave a Comment Below 0 comments

Leave a Reply: