Best Scroll Saw Blades for Different Types of Projects
Even if you are using the best scroll saws, the blades will need to be replaced at one point in time. Good thing, nowadays, you do not have to go to a hardware store. All you have to do is to browse for scroll saw blades online.
The downside of doing this is that you really cannot trust most of the brand advertisements. More often than not, they tend to hype the product for what it really is. The end result is that our expectations are not met.
On the other hand, it is great to buy online because there are a lot of great deals where you can really get the most bang out of your buck. The only question is, which one to choose?
We are going to help you with that decision. Here, we are going to take a look at four scroll saw blades and also help you in picking the best one with our buying guide. So read on to see which one best suits your needs.
Scroll Saw Blades Comparison Chart
Best Scroll Saw Blades: Our Four Picks
Below, we listed down all the notable features of each blade, as well as its corresponding advantages and disadvantages. At the same time, we also discussed the purposes of each and the type of person who will have the most use out of them.
1. SKIL Plain End Scroll Saw Blade Set (36 Pieces)
These scroll saw blades are made of steel that is high in quality, which ensures that they won’t dull easily as well as have an increase in endurance. At the same time, the blade can cut through almost anything as it can be used on plastics, non-ferrous metals, and wood.
You will be glad to know that you will get a lot of uses out of this as it comes with a lot of blades, 36 in total. You get 12 blades that have 9.5 teeth per inch, 12 blades that have 11.5 teeth per inch, and 12 blades that have 28 teeth per inch.
With this number of blades, you do not only get quantity but variety as well. This will allow you to use them in different projects and tasks that are repetitive. This set is also ready to be used once unboxed as every blade was already precisely sharpened.
- Comes with a lot of blade types
- Well constructed
- Easy to use
- Made from high-quality material
- Cannot hold the sharp edge well
- Not that durable
2. Flying Dutchman Spiral Scroll Saw Blade Pack
If you are after a variety of blades, this set might just be for you. It has five different blade designs, and each design has 12 blades that are made of high-quality and top-rated hardened steel.
One of the notable designs is the Polar #5, which is great for Corian, wood, acrylic pieces, and bone. There is also the Ultra Reverse #5, which is an all around blade.
This type of spiral blade is also better than the others in such a way that it can deliver cuts that are smoother compared to other regular blades. More than that, these blades are milled fresh off the box. Therefore, you can use them right off the bat. They are also made of high-quality material, so you will be able to use them for a long time.
- Smoother cuts
- Can be used for different projects
- Comes with a variety of blades
- Durable and easy to use
- Can keep sharp edges for a long time
- Can be too thin
- Bends slightly when in use
- Not for beginners
3. Olson Saw FR49501 Scroll Saw Blades
This set will be a good option if you have an older version of a scroll saw. This is the case because these are pinned blades.
Nowadays, not a lot of scroll saws use pinned blades due to the advent of pinless blades. Nonetheless, these pinned blades are still worth looking at especially if your main concern is the easy mounting of this blade.
There are three blade types that you can use based on the material that you are working on. For every blade type, you get six blades, so you will not be repurchasing blades as much.
In general, it can cut through plastic, softwood, and hardwood. If you are a beginner, you might just give this one a try because its installation, as well as use, is very straightforward.
- Perfect for beginners
- Easy to use
- Great value
- Compatible with old saw models
- Inconsistent in quality
- Not compatible with modern saws
- Not that sharp or durable
- Tricky to fit
4. Delta 40-519-Precision Scroll Saw Blades
Out of all the best scroll saw blades in this read, these ones have a unique design. They have teeth that are dual direction so that you can cut much faster when doing both an upstroke and a downstroke. In addition, it also has raker teeth for a cleaner and more accurate cut when it comes to cutting corners and squared sides.
What is so different about this set compared to the previous ones we discussed is that its blades are not sold in variety packs. Therefore, before buying, you should know the exact blade that you are looking for. You can choose from five blade designs, and each design comes with 12 blades.
These are also perfect for faster and straighter cuts, especially on hardwood. Lastly, you will feel that you are cutting with less effort because there is not much burning while doing the cuts.
- Unique blade design
- Delivers a faster cut
- Great for both softwood and hardwood
- Easy to use
- Does not cut smoothly
- Not a lot of variety
- Not that sharp
Now that you know the top four scroll saw blades, let us now move on to the things that you should know before buying any of them. Having a little bit of knowledge about the important factors of scroll saw blades would surely help you pick the one that suits your preference as well as the exact one needed for your current project.
Not only that, but it can also help you to compare and contrast easily the strengths and weaknesses of a certain scroll saw blade.
Below, we are going to discuss the two types of scroll saw blades as well as the importance of knowing the number of teeth per inch. At the same time, we will also talk about the different arrangements of teeth and the designs that come with it.
We pretty much have a lot of ground to cover, so read on!
Pinless vs. Pinned Blades
There are two types of scroll saw blades, and these are pinless blades and pinned blades. You have to know which type you should purchase in order to make sure that what you are buying are compatible with your current scroll saw.
Now, let’s go over each type of scroll saw blade and list the pros and cons of using each type.
These are usually used for making precise cuts. At the same time, if you want to make a small hole, this is the type to blade to go for. It can even be threaded through a hole that is as small as 1.64 inches. Furthermore, a lot of scroll saws nowadays use this type of blade.
In order to put it into your saw, you have to thread the blade in place. Then, you can put in the blade on the slot at the top and secure it at the bottom of the table. Obviously, to secure it in place, you should tighten all of the clamps as well.
- Compatible with modern scroll saws
- Great for jobs that require accuracy and precision
- Not great for massive cuts
- Harder to install
As the total opposite of pinless blades, pinned blades are great with older scroll saw models. As the name suggests, pins are used in order to hold the blade in the right position. As for the pin itself, it is formed by a cross piece that will then settle on a holder that looks like a hook. This is what is holding the blade while it cuts.
For you to use it, all you have to do is to release tension. As for changing the blade, you can easily pop the hooks out, and the blade will follow.
In general, you can use this type of blade for all-around cuts. When working through holes, this blade at its minimum can go through a hole that is 1.16 inches.
- Easy to replace
- Used for general cutting
- Requires a lot of preparation when making interior cuts
- Cannot be used to work on small holes
Teeth per Inch
Moving on, you should also take note of the number of teeth per inch because it greatly affects how the blade will perform. In general, those that have a lot of teeth per inch works slower. This is the case because, by design, the teeth are smaller, which means that the wood that they cut is less with every stroke. On the other hand, these blades are great for creating smooth curves because using it will not damage a lot of wood integrity.
With that in mind, if you are working on a project where you need to do a lot of curves, then a blade with a higher tooth per inch will be great. However, do keep in mind that these tend to be more fragile as they are thinner. This means that it will be much harder to cut hard materials and that they tend not to be as durable because they constantly deal with a lot of pressure.
With that said, a thicker blade with fewer teeth per inch is great for cutting hard materials. Not only that but they also work faster and are more durable. These are great for making rough cuts as well as making large curves.
Based on the designs that are available in the market, it is very easy to find both types of blades, and the good thing about it is that there are also in-between teeth per inch. Do take advantage of these in-between measures because they will increase your precision and speed.
Furthermore, it is also good to know that manufacturers tend to label the teeth per inch differently. Most specifically indicate the teeth per inch, while others assign a number like 2/0 for the small ones, or two increments like 3, 5, 7, and so on.
Arrangement of Teeth
The arrangement of teeth also affects the way the blade will cut. Some arrangements will not be appropriate for general cutting, while others are made for just a specific cut.
Let us now go over six of the teeth arrangements.
- Standard Blades
For standard blades, the teeth are placed in an equal distance from each other. In general, metal is used for these blades, but there are also ones that are made from plastic or wood. These, in turn, can be used to cut through metal and plastic surfaces. With that said, standard blades can be your all-around blade.
- Skip Tooth Blades
Usually, this type of blade is what beginners use. This is the case because it does not generate a lot of heat because they cut so smoothly. As for the tooth shape, it is very similar to that of the standard blade, but there is a gap for every other tooth.
Skip tooth blades cut significantly slower. This makes them the best choice for those who want to have more control over the blade.
- Reverse Skip Tooth Blades
When it comes to the teeth-per-inch patterns, reverse skip tooth blades are very much alike skip tooth blades. The only difference is that the teeth that are nearest to the bottom are turned around and are facing the other direction.
Due to this design, you always have to make sure that there are only a few teeth that extend above your table once you mount this blade. This type of design helps with the tearing out of the bottom pieces, and it is also great when working with plywood because this material tends to do a lot of splintering.
- Double-Tooth Blades
Double-tooth blades have a design that is similar to that of skip tooth blade; only this time, for every third tooth, there is a skip. What you end up with are paired pointed down teeth that are separated with at least a gap of a single tooth.
At the same time, these tend to be slower than that of a standard blade and a skip tooth blade, but they deliver a very smooth cut. With that in mind, these will be great to be used on projects that need a lot of detailed work.
- Spiral Blades
These are indeed very interesting blades because they can cut in all directions. This is due to the fact that it has blades that are twisted wherein the points are aimed at 360 degrees. These are located around the center of the blade.
On the other hand, they are not that precise, but they are great when you need to expand a hole quickly. This is actually its specific purpose. Unfortunately, other than that, they do not have a lot of uses.
- Crown-Tooth Blades
It is very easy to spot a crown-tooth blade. All you have to do is to find a blade where its teeth come in pairs. One of which is facing up, while the other is facing down. This means that when this blade is mounted, it can cut in both directions.
While these blades do not work very fast, they will be great at cutting plastic. Hence, if you are someone who works with plastics a lot, then this will be a great addition to your collection.
If you are ever questioning your scroll saw blade choice, just go back to this buying guide and find what factors are most important for the type of work that you are doing. With this knowledge, you are now more equipped to have an informed choice.
The easiest way to do this is to determine what type of cut is needed for your project; only then can you decide which blade design and teeth per inch to go for.
Surely, the next time that you have to repurchase a blade, you will not get lost in the array of choices there is. It will now be easier for you as you can divide the type of blades into different categories based on the required cut of your work. With that said, good luck on your project and collect as many scroll saw blades as needed.
If you ask us, the top pick out of the four scroll saw blades that we discussed is the SKIL 80182 Plain End Set. We chose this one for its precision and accuracy. At the same time, you get a lot of blades as well, so you do not have to repurchase for a long time.
If what you are after is durability, a good choice is the Flying Dutchman Spiral Pack. You really cannot go wrong with its five different styles, which are great for versatility in cuts.
On the other hand, for those who have the older version of scroll saws, go for pinned blades such as the Olson Saw FR49501. It is also a win-win situation as they are extremely affordable. Lastly, if you are looking for a low count of teeth per inch, then the Delta 40-519 Precision Blades Set will be perfect for you because it has raker and dual direction teeth.
Table of Contents
- 1 Scroll Saw Blades Comparison Chart
- 2 Best Scroll Saw Blades: Our Four Picks
- 3 Buying Guide
- 4 Conclusion