Best Chainsaws for Cutting Firewood: The Mighty and Powerful

It can be hard to get the best chainsaws for cutting firewood because of the many options out there. One can easily get blinded with lots of claims and then end up disappointed when the time comes. Lucky for you, you’ve got us.

Here, we’ll share with you the important factors to look for so that you can buy the right chainsaw that matches your needs and preferences. Before that, though, we’ll take a close look at five different chainsaws and list down each of their features, pros, and cons.

Best Chainsaws for Cutting Firewood Comparison Chart

Husqvarna 460 Rancher, 20 in. 60.3cc 2-Cycle Gas Chainsaw

DEWALT DCCS620B 20V MAX XR Compact 12 in. Cordless Chainsaw (Tool Only)

WORX WG304.1 Chain Saw 18-Inch 4 15.0 Amp

BLACK+DECKER LCS1240 40-volt Cordless Chainsaw, 12-Inch

Sun Joe SWJ698E 12-inch 9-Amp Electric Chain Saw

Best Chainsaws for Cutting Firewood: Our Top Five Picks

From these reviews, you can easily see which chainsaw will falter and which model can last you through the test of time. Are you ready to meet our top five picks? Then keep on reading!

1. Husqvarna 460 Rancher Chainsaw

This chainsaw has a feature called X-Torq, which can deliver less fuel consumption as well as reduced exhaust emission levels compared to other chainsaws. This makes this chainsaw an environment-friendly choice because it does not emit a lot of carbon.

Moreover, this chainsaw also has a smart start feature where the starter and the engine start quickly and without a lot of effort. It has an air injection feature too, which is a centrifugal air cleaning system that prevents debris from reaching the air filter. Therefore, you do not have to clean the filters as much, and this can also improve the life of the engine.

In this chainsaw, there is also an oil pump that is adjustable. You can control the oil flow with this, which will depend on the weather condition and other applications. Lastly, it has an air filter that can be quickly released so that you can easily clean and replace it.


  • Easy to use and assemble
  • Has consistent power
  • Powers on easily
  • Good construction
  • Great customer service


  • Not ideal for small jobs
  • Chains can stutter
  • Will randomly stop running
  • Bar is small
  • Trigger is plastic

2. DEWALT DCCS620B Firewood Cutting Chainsaw

This chainsaw has a 12-inch Oregon bar chain that has a low kick back. This means that its construction is heavy-duty and is enough to be used on different applications. It also has a brushless motor that is very efficient because its run time is maximized and the motor life is preserved.

The chain gauge measures 0.043 inches, and the chain speed is at 25.2 feet per second. This chainsaw also has a bar tightening and chain tensioning knob, which do not require any tools to assemble. These can also provide the chainsaw with the right bar clamping force.

Furthermore, this chainsaw has a compact design, weighing in at only 8.8 pounds. This means that you will have a lot of comfort and control when using this tool. Keep in mind that this is only a bare tool item. Therefore, you have to purchase the battery separately.


  • Easy to use and lightweight
  • Has simple settings
  • A breeze to set up
  • Has little kickback
  • Has consistent speed


  • Not that durable
  • Does not come with everything you need
  • Has a lot of flimsy plastic attachments
  • Hard to remove the filter cap
  • Chain can jam
  • Oil tends to leak

3. WORX WG304.1 Firewood Chainsaw

This chainsaw has a 15.0-amp motor output that can deliver superb cutting performance. It also ha an auto-tension chain system, which is patented and can automatically prevent over tightening. Therefore, the bar that is 18 inches will remain with the right tension even if you use it a hundred times.

The bar also has a low kickback, and it has a built-in chain brake as a safeguard. The total number of chain links is 63. In addition, this chainsaw also has a built-in oil reservoir that has a window level indicator. It also has an automatic oil lubrication feature, so you do not have to constantly manually lubricate the machine.

As for the oil tank capacity, it is 200 mL. Also, when you first take it out of the box, this power tool comes assembled already. Therefore, you can use it outright.


  • No assembly required
  • Easy and convenient to use
  • Cuts efficiently and fast
  • Provides consistent power
  • Easy to wield


  • Drive gears tend to strip
  • Hard to find spare parts
  • Oil tends to leak
  • Prone to jamming
  • Not that durable

4. BLACK+DECKER LCS1240 Cordless Chainsaw

This time, we have a cordless chainsaw that runs on a 40V lithium-ion battery. Therefore, even though it is only powered by a battery, it still has a long running life. It has a premium bar and chain that measures 12 inches, and it also has an oiling system that is automatic.

This cordless chainsaw will be great to be used on cutting fallen limbs and pruning branches. Furthermore, it has a chain tensioning system that does not need any tools to set up.

The chains are also easy to adjust. There is a handle that can be fully wrapped around, so you are comfortable while cutting at different directions.


  • Good battery life
  • Consistent power
  • Easy to use
  • Lightweight and versatile
  • Not prone to jamming


  • Oil pump does not distribute oil properly
  • Only great for small jobs
  • Oil can easily drain
  • The battery indicator is prone to malfunction
  • Lacks torque

5. Sun Joe SWJ698E Chainsaw

This chainsaw is ideal to be used for pruning branches and limbs as well as for trimming them. It has a motor that is nine amps and can cut woods that are up to 11.5 inches thick.

What’s more is that this also has a built-in safety switch so that you will not accidentally start it. You will also find that it is mostly made out of plastic material, and it does not need gas to function.

The Sun Joe SWJ698E only weighs seven pounds, which means that you can easily maneuver it. Its bar and chain measure is 12 inches, and it also has a chain lubrication system that is automatic.


  • Compact and lightweight
  • Easy to use and set up
  • Cuts properly
  • Powers up quickly
  • Great maneuverability
  • Great customer service


  • Not that durable
  • Only good for small jobs
  • Cuts slowly
  • Prone to jamming
  • Power is inconsistent
  • Hard to find chain replacement

Buying Guide

Now that you know our top five picks for the best chainsaws for cutting firewood, it is now time to widen your knowledge in terms of knowing the important factors in choosing a chainsaw.

You have to know that it is not only about power. Why is that? This is because even if you have immense power, the construction of the chainsaw itself is poor, and you really cannot use it at its best.

At the same time, if you cannot properly wield that power, you just might find yourself not using the chainsaw that you bought. In order to avoid these problems, there are four important factors to look out for. These are durability, ease of use, proper handling, and weight.

There are still other factors, but if these four display good results, then it is safe to say that what you are eyeing on is well worth it.


Remember that you are using a chainsaw to cut through such tough material. Therefore, you have to have a chainsaw that will last through that ordeal.

Make sure that it can withstand pressure and rigor. If it falters and even cuts out power during a cutting process, then that will not do.

More than withstanding pressure, it should also maintain its power throughout the project. There should be no jamming and power cutoffs. Most importantly, it should be something that you can use for a long time. It is worthless to have a chainsaw that you can only use once, right?

Ease of Use

Ease of use refers to how you can handle the chainsaw. Also, it pertains to your ability to wield and maneuver it properly in the way you want. With that in mind, it should be lightweight but heavily constructed at the same time.

Also, the settings should be just right for you to know what you are going to do. There are releases where you can adjust speed and power. In terms of cranking it up, it should be started immediately without you having to break a sweat just to start your chainsaw.

Another thing to note is its safeguards. You might be able to hold it well and cut easily, but what about your safety? If you have children and pets, it will be very useful to have a chainsaw that cannot be easily turned on. Attachments that are secure is also a great help because you do not want anything falling off while you are cutting something.

Keep in mind that you should get something that fits your ability instead of getting one that has a lot of power that you cannot manage. You might just end up cutting your own arm if that is the case. In order to check ease of use, just focus on the safety features, starting features, and design of the chainsaw.

Proper Handling

This is in relation to ease of use. You might think that it is a small aspect, but it is really not. It is important that you can hold the chainsaw well and securely. Therefore, look for a handle that has a natural fit for your grip.

It is also good to have ridges on the handle so that your fingers have something to grip on. There are also models where they have padding so that you do not strain your hands and arms too much while cutting something. Take note that for you to have a smooth cutting experience, you must have the proper form.

Achieving this proper form is impossible if you struggle to hold up your chainsaw. You should also take note of how big or how small the handle is. Usually, a bigger handle means that it is prone to slipping. On the other hand, if you have a small handle, it puts a lot of pressure on your hand.

How Heavy It Is

This ties in with proper handling and ease of use. These two previous factors rely heavily on how heavy or how light the chainsaw is. A good thing about having a heavy chainsaw is that it tends to hold up properly against a lot of pressure. The downside is that it can be hard to wield and maneuver.

Therefore, if you are going to get a chainsaw that is on the heavy side, make sure that it has certain features in it that can assist you in using it. Meaning, the handle should fit properly and that the settings are easily customizable. On the other hand, having a light chainsaw usually means that you are going to tackle light jobs.

In this case, you have to make sure that it has enough power to cut through a certain thickness. In addition, its attachments should not be made of plastic or any other flimsy material. If you already have a lightweight unit with flimsy material, it really does not offer you any support while you are cutting.

The result is that you are like working with a manual saw as you need to put a lot of effort against the chainsaw. So, just keep in mind that if what you are getting is a lightweight saw, you should only cut light materials. Always check if the attachments are secure so that you will not have a hard time cutting through anything.


We chose the Husqvarna 460 Rancher Chainsaw as our top pick because of its power and functionality. It is also versatile because you can do light and heavy work with this one.

At the same time, this chainsaw does not require a lot of maintenance because it has a self-lubricating system. Definitely, this is a chainsaw that will last through the test of time.

Just to conclude our discussion, remember to always pair your chosen chainsaw with the material that you will always be working on. Having a powerful chainsaw might be your jam, but if you are just going to use it on hanging branches, then you are just going to waste money and effort.

We already gave you our top five picks, so now, all you have to do is to choose which one goes well with your cutting needs. Good luck!